塑料机械行业

主页 > 产品与应用 > 塑料机械行业 >

塑料机械配套产品

日期:2020-10-08 13:10 作者:atmhip 阅读:
一、产品介绍
      热等静压(HIP)工艺与铸造、锻造等传统的冶金工艺相比,制备的材料晶粒更细小,组织更为均匀,与基材结合强度更高,因此在耐磨性、强度、韧性上都有大幅提高,能够显著延长螺杆、料管等关键零部件的使用寿命,已成为高端螺杆和料管制造的关键技术之一。
Compared with traditional metallurgy process, such as casting, forging, the materials made by PM-HIP have fine grain, uniform microstructure, and higher bonding strength with base materials. Therefore, the properties, such as wear resistance, strength and toughness have been enhanced significantly, which improved the service life of key parts of machine, such as screw and barrel. The PM-HIP has become one of important technologies in the advanced screw and barrel manufacturing.
      安泰科技作为国内新材料领域的领军企业,拥有多台套大中小型热等静压装备,是国内热等静压生产和加工的重要基地。公司多年来一直致力于塑料机械领域高耐磨、高耐蚀合金体系的研制和开发,目前已批量为用户提供热等静压工艺生产的注塑机用全硬粉末合金螺杆材料和双金属料管材料,以及挤出机用双金属螺纹元件材料和全硬粉末合金衬套材料,年生产能力>10000套,可完全替代进口产品。
As a leading enterprise in the field of new materials in china, AT&M has HIP equipment in different size, and is the important base of HIP processing. AT&M has been committed to the research and development of high wear resistance and corrosion resistance alloy system in the field of plastic machinery for many years. At present, AT&M has provided customers with HIP all powder alloy screw materials and bimetallic barrel materials for injection molding machine and bimetallic screw element material and all powder alloy barrel material for extruder machine. The annual production capacity is more than 10000 sets, which can completely replace imported products.
    规格
挤出机
(Extruder machine)
螺纹元件材料(screw element) 直径20mm~500mm,长度不大于2000mm(diameter: Φ20~Φ500mm, length≤2000mm)
衬套材料
(bushing material)
外径20mm~1000mm,长度不大于2000mm(diameter: Φ20~Φ1000mm, length≤2000mm)
注塑机(Injection molding machine) 螺杆材料
(screw material)
内径Φ14mm~Φ70mm,长度不大于2000mm(inner diameter: Φ14~Φ70mm, length≤2000mm)
料管材料
(barrel material)
硬质层厚度大于1.5mm,内径Φ14mm~Φ70mm,长度不大于2300mm(cemented carbide layer thickness>1.5mm, inner diameterΦ14~70mm, length≤2300mm)
















铁基产品扫描电镜(microstructure of Fe-based)


镍基产品界面扫描电镜(microstructure of Ni-based)

二、产品性能、应用
热等静压(HIP)高性能耐磨耐腐蚀材料






螺杆牌号(screw No.) 适用场合(application)
ATM-BMS-1 主要应用于无卤阻燃塑料注塑成型,可加工性优良,对于加玻纤或其它增强材料30%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, good processability, for glass fiber or other reinforced materials less than 30%
ATM-BMS-2 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料50%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 50%
ATM-BMS-3 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料65%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 65%
ATM-BMS-4 主要应用于一般阻燃塑料注塑成型,对于加玻纤或其它增强材料50%以内的塑料应用效果好。Mainly used in normal flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 50%.
ATM-BMS-5 主要应用于一般阻燃塑料注塑成型,对于加玻纤或其它增强材料65%以内的塑料应用效果好。Mainly used in normal flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 65%
ATM-BMS-6 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料50%以内的塑料性价比高。Mainly used in halogen-free flame- retardant plastic injection molding, for glass fiber or other reinforced materials less than 50%
料管牌号barrel No. 适用场合(application)
ATM-BMT-1 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料50%以内的塑料应用效果好。Mainly used in halogen-free flame- retardant plastic injection molding, for glass fiber or other reinforced materials less than 50%
ATM-BMT-2 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料65%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 65%
ATM-BMT-3 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料30%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 30%
ATM-MBT-4 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料50%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 50%
ATM-MBT-5 主要应用于无卤阻燃塑料注塑成型,对于加玻纤或其它增强材料65%以内的塑料应用效果好。Mainly used in halogen-free flame-retardant plastic injection molding, for glass fiber or other reinforced materials less than 65%

三、相关照片

挤出机双金属螺杆坯料、全合金衬套坯料照片(bimetallic screw , all-alloy  barrel raw materials for Extruder)

挤出机衬套及成品(Extruder barrel products)

双金属挤出机螺纹元件坯料 (raw materials of Extruder bimetallic screw element )  
 
  • 上一篇:没有了
  • 下一篇:没有了